Mobile Welding Smoke Extracton unit for metal fabrication welding
Qingdao Loobo welding fume extractor are mainly used to
extract/collect the fume and dust in the metal fabrication process,
like the welding, polishing, grinding, metal cutting, etc.
With active carbon filter layer, some odor gas can be absorbed
before released the clean air. Portable type with small size, you
can move them freely in your workshop to the working position,
economic and high efficiency.
Get the expert advice you need. We'll help you select the model and
type that's right for the job, please contact us freely.
LB-JZ Series Welding Fume Purifier Parameters Table:
L xWxH (mm)
LB-JZ (D) back-flushing pressure is 0.5-0.6Mpa.
The " D " in models represent Pulsing back-flushing automatic
dust-removal system. " S " respresents the welding fume extractor
has the double arms for two working stations.
The welding fume purifier is easy of installation, and has no
technical requirements when the customer install and use it. The
flexible extraction arm is made from high quality material of PVC
and steel wire, which is anti-corrosion, heat-resistant of up to
140°C. It can swivel 360º and can be brought in any desired
direction without additional support. It is equipped with the
damper to adjust the wind. It is equipped with the caster wheels
and can be freely mobile to meet the requirements of different work
The purified gas can meet the standard requirements and can enter
into work room or indoor place, which is helpful to keep the room
close, maintain the temperature and be convenient for work.
1) It is equipped with special turbo fan and motor, both the air
pressure and air volume can reach the standard, and to ensure that
the welding fume purification a good performance.
2) Advanced design of air suction hood and dust collector function
in one body, to prevent the diffusion of welding smoke pollution
from the source.
3) The circuit of the machine is adopted overload protection
circuit, which prevent equipment and circuit burn, so the machine
has a high security and stable performance.
4) The hose of the flexible extraction arm is high quality PVC
steel wire hose, it can resist the 140°C, with corrosion resistance
and light weight .
5) The built in support structure is a set of self balance type
linkage mechanism with characteristics of a full range of hovering,
pull the handle on the hood, easily stretch the arm to reach any
position within the arm length (we can custom made the arms length
according to user needs, the max is 5m long), and hover in the
ideal position of soot absorption without any auxiliary supporting
6)The flexible extraction arm can be applied for the complicated
condition that have no way to install the ducting.
7) Filter is an important part of the fume extractor machine, it is
the heart of the dust removal equipment, its performance and
quality is the key to the service life of the equipment and the
performance of fume extraction. We use the imported PTFE polyester
fiber material for the main cartridge filter. The material has very
low friction coefficient, good wear resistance and excellent
chemical stability, high accuracy, according to the condition of
fine up to 0.2 microns. The material surface is smooth, not easy to
adhere, it is more easy for the pulse jet cleaning system. The
cartridge filter service life is long, around 1-2 years under
normal operating conditions.
8) Cleaning way: manual cleaning, and automatic cleaning system.
For the auto cleaning type, we use the pulse jet cleaning way, that
is, one by one cartridge automatic cleaning orderly, pulse valve
open a time, then generates a pulse action, the injection pulse
intensity and frequency can be adjusted, and the cleaning and
filtration can be run at the same time, so to make sure the machine
works well and promote the production efficiency.
9) the inside of the fume extractor machine is adopted with three
layer protective measures for fire hazard and large molten slag
particles, to make the purifier for a longer service life, and more
safe and reliable.
10) The Fume Extractor is equipped with industrial casters: the
active casters and stationary casters, to make sure a free movement
and positioning. The caster is of surface super polyurethane
materials, to make the equipment has a high impact resistance and
11) The reasonable collocation of the grid air outlet and the high
quality sound insulation material can reduce the noise of the
welding fume purifier effectively.
12) The consumptive material of the fume extractor has a stable
performance, and convenient and quick to change.
Other main welding fume extractors:
1. LB-JZX model(double cartridge filters fume extractor for metal
The JZX models welding fume extractor is one updated model from
LB-JZ models, which have a high performanec than the LB-JZ series
welding fume extractors
2.LB-BG model(wall mounted welding smoke eater type):
3.LB-JK model(with simple structure welding dust collector):
4.LB-JW model(Flat filter welding smoke exhauster):
5.LB-JF model(High vacuum pressure type welding fume master ):
|Kpa||Ash removal model|
We,Qingdao Loobo Environmental Protection Technology Co.,Ltd is
aimed to air purifying and kinds of removing fume exhausted, with
its own R&D team more than ten years manufacturer, located in
Qingdao city of china, specialized in the main products:
1,portable welding fume extractors,and soldering fume extractors
2.downdraft benches(grinding dust removal worktable),
3.central fume purification projects,
4.Spare parts:flexible suction arm,etc.
All of our products with the ISO9001, and CE certification for
parts of products, the quality can be guaranteed
Qingdao Loobo Environmental Protection Technology Co.,Ltd
Factory Address: No.19, Hechuan Road, Licang Industry Park,
Fax : +86-532-8068 7573
www.looboqd.com (English version)
www.loobo.cn (Chinese version)